Having ceramic tiles at home ensures that we are able to express our own style and preference of design, matching our house’s overall theme in the process. The thing is, it still needs a certain level of maintenance so that it will remain to look good overall.

That said, there are times when stains may make their way on the surface, ruining what could have been our tile’s perfect look.

If you want to know how to efficiently remove tough stains from your ceramic tiles, look no further than our helpful tips below.

1. Remove the Excess Mineral Deposits.

One of the most common causes of stains on ceramic tiles is the presence of mineral deposits. This is a common occurrence for those who live in areas with a lot of hard water.

The mineral deposits could appear as an oily residue or as a white powdery substance. This can easily be removed by mopping the floor with a cleaning solution.

Mix in a few drops of pure ammonia into lukewarm water, then use a mild detergent to clean the floor. Mopping the tile surface often with the cleaning solution will remove the mineral deposits from the surface.

After you are done with that, rinse the floor with clean water, and wipe it dry with a clean, dry cloth.

2. Use a Vinegar and Lime Water Solution to Remove the Stains.

This is one of the tried and tested methods for removing stains on ceramic tiles. It may need a bit of your time, but it will surely remove the stains in no time.

All you have to do is mix 1 cup of white vinegar and two tablespoons of lime water into a plastic container. Apply it to the tile using a sponge, and gently scrub the tile surface.

Leave it there for a few minutes to allow the solution to develop. Wipe it off with a clean, dry cloth, and rinse it with clean water.

3. Use a Wet Vacuum to Remove the Stain.

Another way to remove stains is by using a wet vacuum. This should be done immediately after you have cleaned the floor.

After you have sprayed the cleaning solution, use a wet vacuum with a special cleaning pad to clean the floor. This will get rid of any remaining grime and dirt while at the same time removing the stains.

Always remember to rinse the floor with water and then wipe it dry with a clean, dry cloth.

4. Use Potassium Permanganate to Remove the Stains.

Potassium Permanganate is an oxidizing agent and would be able to break the chemical bonds that are causing the stain.

The best part about it is that it doesn’t require any special tools and equipment, making it especially ideal for do-it-yourself on the tile.

Mix about one tablespoon of potassium permanganate into two tablespoons of water, and apply it directly to the stain. If the stain is still present, let it sit for a few hours, and then rinse the area using a wet vacuum.


Removing stains from your ceramic tiles is a pretty straightforward process. All you need is to know the right cleaning solution to use.

The best thing about it is that you can easily get all of the tools and equipment needed within your home. All you need is to take the time to do it, and you will soon have your ceramic tiles looking as good as new.

If you are looking for a company specializing in ceramic tile and countertop installations in San Rafael, CA, look no further than our expertise here at Miconi. We offer a wide range of home amenities and installations that are sure to bring out the beauty of your home. Call us today and let us install all your ceramic tiles in no time!